[c-nsp] CBWFQ on Frame-relay interfaces - 12.2.28SB?

[Rolf Mendelsohn]

Hi Everybody,

Do you know if CBWFQ is supported on Frame-relay interfaces (12.2.28SB)?

If so how would i enable it?

12.2SB

pe1.wdh1.na#sh run | beg Town!
 description 576k Backbone link to TownA
 mtu 1516
 bandwidth 576
 no ip address
 encapsulation frame-relay IETF
 frame-relay lmi-type ansi
 frame-relay intf-type dce
 frame-relay fragment 768 end-to-end
 service-policy output cbwfq
!
interface Serial3/5:0.1 point-to-point
 description 576k Backbone link to TownA
 bandwidth 576
 ip address A.B.C.D 255.255.255.254
 mpls ip
 no cdp enable
 frame-relay interface-dlci 208

pe1.wdh1.na#sh queueing int s3/5:0
pe1.wdh1.na#sh queueing int s3/5:0.1
                                  ^
% Invalid input detected at '^' marker.

pe1.wdh1.na#sh int s3/5:0 fai
pe1.wdh1.na#sh int s3/5:0 fair-queue
pe1.wdh1.na

pe1.wdh1.na(config-if)#fair-queue
Remove HQF queueing from interface before installing legacy command.
Possibly have service-policy with heirarchical shaping attached.

12.4.12SP-Services

gw1.wvb1.na#sh queueing int s1/1:11
Interface Serial1/1:11 queueing strategy: fair
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 406
  Queueing strategy: weighted fair
  Output queue: 0/1000/64/406 (size/max total/threshold/drops)
     Conversations  0/24/256 (active/max active/max total)
     Reserved Conversations 0/0 (allocated/max allocated)
     Available Bandwidth 576 kilobits/sec
!
interface Serial1/1:11
 description 576K Backbone link from Town B
 mtu 1516
 bandwidth 576
 no ip address
 encapsulation frame-relay IETF
 frame-relay fragment 768 end-to-end
 frame-relay lmi-type ansi
 max-reserved-bandwidth 100
end
!
interface Serial1/1:11.1 point-to-point
 description 576K Backbone link from Town B
 bandwidth 576
 ip address A.B.C.82 255.255.255.254
 mpls ip
 no cdp enable
 frame-relay interface-dlci 208
end

cheers
/rolf