[c-nsp] PRI D-Channel state 5 (dormant)?

[Chris Boyd]

Hello,

I have some 3845s with 23B+D PRIs terminated on them for a voice  
application.  We're working on test and turnup, and discovered an  
annoying problem.  The ifOperStatus table entry for the D-channels  
occasionally goes into a state 5.  According to Cisco's MIB docs,  
this means that the interface is "dormant" and ready to send or  
receive packets.  Since we're just doing basic function tests at this  
point, it's impossible for us to tell if the PRI with the dormant D- 
Channel is actually working.

We're running a 12.4T release.

Any hints appreciated.

-Chris