[c-nsp] Catalyst 4503 problem?

Robert Bugala rbiotg at gmail.com
Tue Feb 13 08:05:23 EST 2007


On 13/02/07, Brad Henshaw <brad.henshaw at qcn.com.au> wrote:
[...]
> Autonegotiation is also specified as mandatory for 1000Base-T so is
> probably best left enabled. Starting at layer 1, try setting speed/duplex
> to auto and using a straight-through cable, assuming the modules you're
> using support Auto-MDIX as mentioned by Niels.

It seems its not supporting mdix, my bad, made wrong asumption it does :/.

Thanks guys.

Regards,

Robert


More information about the cisco-nsp mailing list