[c-nsp] high cpu usage due to interrupts

[ulisses]

On 2007-02-13 17:23:57, ulisses wrote:
[...]
> > > Addionally (I haven't mentioned previously) is that when multicast
> > > comes in (around 10-15 Mbps) the cpu burns at 100%. But first 
> > > I wanted to make clear that there is no problem with unicast traffic.
> > 
> > Oh yeah...that would burn it like a champ. Especially when you don't
> > have mdfs (multicast distributed fastswitching) capability.
> 
> I have it enabled
> 

I wanted to mean: I have it enabled on all interfaces that has a VIP, 
my ATM interface doesn't. I will try to re-route the multicast traffic
through a VIP enabled FastEthernet in hope this makes a difference.

best regards

	Ulisses
_______________________________     __    ___________________________________
                                   /_/
Network Operation Center     __            __          Email:  noc at rediris.es
RedIRIS/Red.es              /_/  RedIRIS  /_/
Edificio Bronce                   __                   Tel:    + 34 912127625
Pza. Manuel Gómez Moreno, s/n    /_/             Urgencias:    + 34 629148201
E-28020 Madrid                                         Fax:    + 34 915568864

_________________ Spanish Academic & Research Network _______________________