[c-nsp] upgrade to 12000 XR

[Matthew Crocker]

Is the 12008 (GSR8) chassis supported with XR?     I thought only the  
4,6,10 & 16 were supported and the 8 was EoL, dead chassis

-Matt

On Feb 13, 2007, at 3:41 PM, Jin Lin wrote:

> Hello,
>
> We are considering upgrade our 12008 GSR to run IOS XR
> , after research the docs we are proposing to add the
> following hardware:
>
> http://www.ciscosystems.com/en/US/products/hw/routers/ps167/ 
> products_qanda_item0900aecd8027c915.shtml
>
> XR-PRP-2
> 12000-SIP-401
> SPA-8X1FE-TX-V2
>
>
> But when we look at the table from the following page:
>
>
> http://www.cisco.com/en/US/products/ps5845/ 
> products_installation_guide_chapter09186a00806a5aa5.html#wp1105703
>
>
> in only shows SIP-501 and SIP-601, 8X1FE is not in the
> table either. I'm pretty sure the hardware we are
> proposing should be supported but would like to
> double-check.
>
> thanks,
> lin
>
>
>
> ______________________________________________________________________ 
> ______________
> Expecting? Get great news right away with email Auto-Check.
> Try the Yahoo! Mail Beta.
> http://advision.webevents.yahoo.com/mailbeta/newmail_tools.html
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

--
Matthew S. Crocker
President
Crocker Communications, Inc.
Internet Division
PO BOX 710
Greenfield, MA 01302-0710
http://www.crocker.com