[c-nsp] 2621 with no flash

[Vincent De Keyzer]

Hello,

 

BRU001ro21#sh ver

Cisco Internetwork Operating System Software

IOS (tm) C2600 Software (C2600-IO3-M), Version 12.0(7)T,  RELEASE SOFTWARE
(fc2)

Copyright (c) 1986-1999 by cisco Systems, Inc.

Compiled Tue 07-Dec-99 03:30 by phanguye

Image text-base: 0x80008088, data-base: 0x80814F5C

 

ROM: System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)

 

BRU001ro21 uptime is 2 hours, 30 minutes

System returned to ROM by power-on at 08:27:01 UTC Fri May 6 2005

System restarted at 14:03:11 CET Thu Feb 15 2007

System image file is "flash:c2600-io3-mz.120-7.bin"

 

cisco 2621 (MPC860) processor (revision 0x600) with 53248K/12288K bytes of
memory.

Processor board ID JAD05370FJX (2470153302)

M860 processor: part number 0, mask 49

Bridging software.

X.25 software, Version 3.0.0.

2 FastEthernet/IEEE 802.3 interface(s)

32K bytes of non-volatile configuration memory.

 

Configuration register is 0x2102

 

BRU001ro21#sh flash

               ^

% Invalid input detected at '^' marker.

 

BRU001ro21#sh file systems

File Systems:

 

     Size(b)     Free(b)      Type  Flags  Prefixes

       29688       27041     nvram     rw   nvram:

           -           -    opaque     rw   null:

           -           -    opaque     rw   system:

           -           -    opaque     ro   xmodem:

           -           -    opaque     ro   ymodem:

           -           -   network     rw   tftp:

           -           -    opaque     wo   lex:

           -           -   network     rw   rcp:

           -           -   network     rw   ftp:

 

BRU001ro21#

 

If this router has no flash, how can it possibly have booted from
flash:c2600-io3-mz.120-7.bin ???

 

Vincent