[c-nsp] Explicit path

Michel Renfer michel.renfer at finecom.ch
Mon Feb 19 14:33:43 EST 2007


Hi All

Assume the following (sample) topology with 7600/Sup720-3b, SFX7
and MPLS encapsulation between all three 7600:


 Video SRC ---2 x GE--- 7600 A =====10G====== 7600 ---2 x GE--- Video
DST
                           \                   /
                            \                 /
                             \               /
                            1x GE          1x GE
                               \           /
                                \         /
                                 \       /
                                  7600 C

Video SRC sends out encapsulated MPEG2 transportstreams with a
total bandwidth of approx 1.1G. Traffic between 7600 A and B
can be transported inside a L3 VPN or with two EoMPLS tunnels)

How can configure, that the traffic between Video SRC and Video
DST only used the path between 7600 A and B and never over C?
It is clear, that in case of a failure of the 10G link, the 
connection between SRC and DST will be broken.

Can someone give me the right pointer(s), how this can be 
configured?

cheers,
michel







More information about the cisco-nsp mailing list