[c-nsp] IP INPUT process growing 9Mb/day
Mattias Eliasson
mattias at teknikmejeriet.se
Fri Feb 23 03:54:35 EST 2007
Hi again
Further info, checking sh process cpu history shows that the average is
below 10% but that cpu peaks out at 90% regularly.
1 88888 11111
0 11111 333334444455555 33333 333332222299
100
90
80 *****
70 *****
60 *****
50 *****
40 *****
30 *****
20 *****
10 * ********** *******
0....5....1....1....2....2....3....3....4....4....5....5....
0 5 0 5 0 5 0 5 0 5
CPU% per second (last 60 seconds)
9899999898989899999999889999998899898998999899999998989898899988898898
2691521829073610320420881143049950908228324801331228372519864389719869
100 * * * *
*
90
**********************************************************************
80
**********************************************************************
70
**********************************************************************
60
**********************************************************************
50
**********************************************************************
40
**********************************************************************
30
**********************************************************************
20
**********************************************************************
10
######################################################################
0....5....1....1....2....2....3....3....4....4....5....5....6....6....7.
0 5 0 5 0 5 0 5 0 5 0 5
0
CPU% per hour (last 72 hours)
* = maximum CPU% # = average CPU%
Best regards
Mattias Eliasson
Teknikmejeriet AB
2007-02-23 kl. 09.04 skrev Oliver Boehmer (oboehmer):
> Mattias Eliasson <> wrote on Friday, February 23, 2007 8:48 AM:
>
>> Hi all
>>
>> I wrote a few day ago about a memory fragg issue but got no response.
>>
>> I now have some more info about the problem.
>>
>> It turns out it is not a Fragg but the IP INPUT process growing by
>> 9Mb/day.
>>
>> This will offcourse reach reboot time again soon so any help will be
>> very appreciated.
>>
>> HW Config is 6503-E Sup32 8xGE and a 6148-GE-TX
>>
>> IOS is 12.2(18)SXF7 (which I know several other ISPs run without
>> issues).
>>
>> Config is:
>> 2x full feeds
>> OSPF and iBGP about 150 prefixes
>> 2 GRE-multipoint tunnels
>>
>> What am I missing?
>> Any tips appreciated!
>
> issue "show proc mem <pid>" (where <pid> is the process id of the IP
> Input process) a couple of hours apart and check which PC(s) show an
> increasing number. Please post the result along with a "show version".
> IP Input handles packets to the CPU. Does "show proc cpu" show high
> utilization in the input process?
>
> oli
More information about the cisco-nsp
mailing list