[c-nsp] 3845 with VWIC2-2MFT-T1/E1 and NM-2FE2W-V2

[Joe Maimon]

Church, Chuck wrote:

> Joe,
> 
> 	Take a look at your show run.  You need to issue the 'card type'
> command to tell the VWIC whether to do T1 or E1.  Once you do that, the
> description in the show ver will change for them.  No idea about the
> packet loss on the NM.  Can an NM slot do line rate fast Ethernet?

I was getting packet loss on full size pings - the router isnt in service.

Everything appears to work fine now -- thanks for your help with the 
card type.

Joe