[c-nsp] Logging Problem - Access Lists - GSR

[Paul Stewart]

Thanks.. yes, that's correct (interface names).... I'll do some bug hunting
and go from there... just wanted to make sure it wasn't something obvious I
didn't know about..;)

Paul
 
> 216.168.107.12(0) (GigabitEthernet0 ) -> 216.168.107.12(0), 1 packet 
> SLOT 5:Jan 23 08:08:08: %SEC-6-IPACCESSLOGP: list 150 denied udp
> 216.168.115.15(0) (GigabitEthernet0 ) -> 216.168.115.15(0), 1 packet 
> SLOT 7:Jan 23 08:13:01: %SEC-6-IPACCESSLOGDP: list 150 denied icmp 
> 66.79.234.100 (FastEthernet1 ) -> 66.79.234.100 (0/0), 1 packet
> 
> These are not valid interface names.. is this confirmation or a bug in 
> IOS??

but you have FastEthernet7/1 and GigabitEthernet5/0 (for example) in your
chassis, I reckon?

The problem could be that the logging messages are issued by the LC CPU (as
shown via the "SLOT <n>" prefix), and the IOS on the LC CPU apparently uses
the locally significant interface name (without the slot
argument) in the logging output.. looks like a bug. 

	oli