[c-nsp] NM2FE-2W & WIC4ESW

[Djerk Geurts]

They do both support trunking (dot1q, not sure about isl). But, you need to
realise that the ESW is a switch plugged into a router whereas the NM-2FE
just adds routed interfaces.

I would not expect the ESW to have 400Mbps to the router, come to think of
it I wouldn't expect that of the NM2FE either. Key is that on the ESW you
create vlans for all 4 interfaces, so vlan 200 is the same vlan on all 4
interfaces. This is not the case with the NM-2FE.

So depending on what you're after your mileage may vary.

-- 
Djerk
www.djerk.nl 

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of abson
> Sent: dinsdag 23 januari 2007 13:31
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] NM2FE-2W & WIC4ESW
> 
> Hi Guys
> 
> Can NM2FE-2W and WIC4ESW Cisco routers expansion modules do the same 
> function for instance vlan trunking.
> 
> Regards;
> 
> Abson 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/