[c-nsp] OSM ports to etherchannel

[Konstantin Barinov]

Hi,

Any ideas why this does not work?

router(config-if)#int ge2/3
router(config-if)#channel-group 2 mode on
GE-WAN2/3 is not added to port channel 2

router(config-if)#int ge2/4
router(config-if)#channel-group 2 mode on
GE-WAN2/4 is not added to port channel 2

router#sh run interface ge2/3
Building configuration...

Current configuration : 80 bytes
!
interface GE-WAN2/3
 no ip address
 negotiation auto
 mls qos trust dscp
end



Thank you!



br
--
Konstantin Barinov
INFONET AS, Tallinn, Estonia