[c-nsp] 7600 cef confusion

Dale W. Carder dwcarder at doit.wisc.edu
Tue Jan 30 14:10:11 EST 2007


Thus spake Charles Spurgeon (c.spurgeon at mail.utexas.edu) on Tue, Jan 30, 2007 at 11:08:49AM -0600:
> 
> Apparently these commands are disable by default on the 6500/7600
> platforms:
> ip cef table consistency-check error-message 
> ip cef table consistency-check auto-repair
> 
> Once that is done you can see results in a show command:
> sh ip cef inconsistency
> 
> As I recall, the cef consistency checker didn't exist in SXD code we
> had been running. We've only recently migrated to SXF and haven't
> started using the consistency checker yet so I don't have any real
> world experience to report.


What do you have set for  "mls cef error action" ... ?

Dale

------------------------------------------------------------------------
Dale W. Carder - Network Engineer   | DoIT Network Services
University of Wisconsin at Madison  | dwcarder at doit.wisc.edu 
(608) 263-3628 | 24hr NOC: 263-4188 | http://net.doit.wisc.edu/~dwcarder



More information about the cisco-nsp mailing list