[c-nsp] VPDN vtemplate being applied to wrong interface

[Ian MacKinnon]

Hi All,

We have a 7206VXR being used to terminate ADSL connection over PPPoATM
using vtemplates and vpdn.

this all works fine.

However we also have an STM-1 using ppp encapsulation for back haul,
this was working OK, as it was configured before the vpdn stuff went
live.

We saw the STM-1 interface bounce, and when it came back it has picked
up the virtual tempate and applied it.
We do not want this to happen, has anybody seen this before, any ideas
on how to stop it?

Config :-
interface Virtual-Template1
 ip unnumbered Loopback3
 no logging event link-status
 load-interval 30
 no snmp trap link-status
 no peer default ip address
 ppp authentication chap l2tptunnel
 ppp authorization l2tptunnel
 ppp accounting l2tptunnel


interface POS1/0
 description  155POS backhaul
 ip address xxx.xxx.xxx.xxx 255.255.255.252
 encapsulation ppp
 ip ospf authentication-key 7 blah
 crc 32
 pos framing sdh
 pos scramble-atm
 pos flag c2 207
!