[c-nsp] PBR Strange behavior

[omar parihuana]

Hi List,

I've configured an policy routing, however the packets don't match the
policy. I re-checked the configuration and all seems fine, I don't know why
that configuration don't work!!! (the packets traverse by default route and
not by Next-hop configured into route-map.

I've paste my configuration:

!
interface FastEthernet0/0.73
 encapsulation dot1Q 73
 ip address 172.20.0.49 255.255.255.252
 no ip redirects
 no ip proxy-arp
 ip policy route-map NEXT-HOP
 no cdp enable
 arp timeout 300
end
!

!
route-map NEXT-HOP permit 10
 match ip address 160
 set interface Serial1/0:0
 set ip next-hop 172.16.1.134
!

!
access-list 160 permit ip 172.20.0.48 0.0.0.3 any
!

Thanks

*The router is a Cisco 3640 with CEF Enabled that works like MPLS-PE router.

-- 
Omar E.P.T
-----------------
Certified Networking Professionals make better Connections!