[c-nsp] RADIUS accounting configuration

[Prit Patel]

Hello All,

i need to config the Cisco 10K in such a way that it should send accounting
start request to Primary RADIUS server and  Primary BPM server
simultaneously.

In case of failure of either primary server 10K should send the accounting
request to respective server i.e. if primary radius fails then account
record should go sec radius and primary BPM. Below is the architecture.

----->>>> Cisco 10K <<<<<<<-----

Pri Radius server               Pri BPM Server
Sec Radius Server             Sec BPM server.



Regards
Prit