[c-nsp] RADIUS accounting configuration

[Prit Patel]

Thanks Oli.

Can we use this feature on BRAS 10K ?

Pl do let me know if you have any idea about this feature support in other
BRAS like Juniper or Radback or huawai ?



On 7/18/07, Oliver Boehmer (oboehmer) <oboehmer at cisco.com> wrote:
>
> Prit Patel <> wrote on Tuesday, July 17, 2007 2:11 PM:
>
> > Hello All,
> >
> > i need to config the Cisco 10K in such a way that it should send
> > accounting start request to Primary RADIUS server and  Primary BPM
> > server simultaneously.
> >
> > In case of failure of either primary server 10K should send the
> > accounting request to respective server i.e. if primary radius fails
> > then account record should go sec radius and primary BPM. Below is
> > the architecture.
> >
> > ----->>>> Cisco 10K <<<<<<<-----
> >
> > Pri Radius server               Pri BPM Server
> > Sec Radius Server             Sec BPM server.
> >
>
> the following config should do the trick ("AAA Broadcast Accouting"
> feature). When one of the servers fail, failover occurs within the
> server group.
>
> aaa group server radius radserver
> server 10.0.0.1
> server 10.0.0.2
> aaa group server radius bpmserver
> server 10.0.0.3
> server 10.0.0.4
>
> aaa accounting network default start-stop broadcast group radserver
> group bpmserver
>
> with appropriate "radius-server host ..." definitions.
>
>         oli
>