[c-nsp] BGP open failed...connection refused due to jitter

[Vikas Sharma]

Hi,

While configuring IBGP, I am getting Active stste in "sh ip bgp summary".
debug of BGP is pested below.

R7-PE5#debug bgp ipv4 unicast
BGP debugging is on for address family: IPv4 Unicast
R7-PE5#clear ip bgp *
R7-PE5#
*Jul 18 09:09:00.476: BGPNSF state: 192.168.2.254 went from nsf_not_active
to ns
f_not_active
*Jul 18 09:09:00.476: BGP: 192.168.2.254 went from Active to Idle
*Jul 18 09:09:00.476: BGPNSF state: 192.168.7.254 went from nsf_not_active
to ns
f_not_active
*Jul 18 09:09:00.476: BGP: 192.168.7.254 went from Active to Idle
*Jul 18 09:09:00.476: BGP: 192.168.2.254 went from Idle to Active
*Jul 18 09:09:00.476: BGP: 192.168.7.254 went from Idle to Active
*Jul 18 09:09:00.480: BGP: 192.168.2.254 open active delayed 27534ms
(35000ms ma
x, 28% jitter)
*Jul 18 09:09:00.480: BGP: 192.168.7.254 open active delayed 31092ms
(35000ms ma
x, 28% jitter)
*Jul 18 09:09:28.016: BGP: 192.168.2.254 open active, local address
192.168.6.25
4
*Jul 18 09:09:28.072: BGP: 192.168.2.254 open failed: Connection refused by
remo
te host, open active delayed 28425ms (35000ms max, 28% jitter)
*Jul 18 09:09:31.572: BGP: 192.168.7.254 open active, local address
192.168.6.25
4
*Jul 18 09:09:31.592: BGP: 192.168.7.254 open failed: Connection refused by
remo
te host, open active delayed 32653ms (35000ms max, 28% jitter)


Can some one pls help me to find out the issue ????

Regards
Vikas Sharma