[c-nsp] traffic shaping on 7600 sip-400 2xge spa.
Winslow, Michael (I.T. Dept)
winslowm at stifel.com
Tue Jul 24 10:32:55 EDT 2007
Currently I'm trying to shape on dot1q's in a 7604, I can mark and the
traffic is working just fine, however I'm unable to shape to the rates
specified in my policies. Suggestions are appreciated. My config is as
follows.
Regards
Mike Winslow
class-map match-any apps_bronze
match dscp af23
class-map match-any apps_gold
match dscp af21
class-map match-any apps_silver
match dscp af22
class-map match-any voicesignal
match dscp cs3
match dscp af31
class-map match-any video
match dscp af41
class-map match-any voice
match dscp ef
class-map match-any routing
match dscp cs6
!
policy-map wan_qos_policy
class voice
priority 320
class voicesignal
bandwidth percent 5
class video
class routing
bandwidth percent 10
class apps_gold
bandwidth percent 20
class apps_silver
bandwidth percent 15
class apps_bronze
bandwidth percent 10
class class-default
random-detect dscp-based
policy-map QoSPolicy_45.0
class class-default
shape average 42500000
service-policy wan_qos_policy
policy-map QoSPolicy_1.5
class class-default
shape average 1460000
service-policy wan_qos_policy
policy-map QoSPolicy_4.5
class class-default
shape average 4378000
service-policy wan_qos_policy
policy-map QoSPolicy_3.0
class class-default
shape average 2919000
service-policy wan_qos_policy
interface GigabitEthernet2/0/1
no ip address
load-interval 30
no negotiation auto
!
interface GigabitEthernet2/0/1.1135
description TNT1
encapsulation dot1Q 1135
ip address 172.27.58.1 255.255.255.252
!
interface GigabitEthernet2/0/1.1136
description TNT2
bandwidth 3074
encapsulation dot1Q 1136
ip address 172.27.58.5 255.255.255.252
ip ospf priority 0
service-policy output QoSPolicy_3.0
!
interface GigabitEthernet2/0/1.1137
description TNT3
bandwidth 1536
encapsulation dot1Q 1137
ip address 172.27.58.9 255.255.255.252
ip ospf priority 0
service-policy output QoSPolicy_1.5
snstldistro1#show mod
Mod Ports Card Type Model
Serial No.
--- ----- -------------------------------------- ------------------
-----------
1 2 Supervisor Engine 720 (Active) WS-SUP720-3BXL
2 0 4-subslot SPA Interface Processor-400 7600-SIP-400
Mod MAC addresses Hw Fw Sw
Status
--- ---------------------------------- ------ ------------ ------------
-------
1 0017.9444.85e4 to 0017.9444.85e7 5.3 8.4(2) 12.2(33)SRB
Ok
2 001b.2a3d.9150 to 001b.2a3d.91cf 2.4 12.2(33)SRB 12.2(33)SRB
Ok
Mod Sub-Module Model Serial Hw
Status
---- --------------------------- ------------------ ----------- -------
-------
1 Policy Feature Card 3 WS-F6K-PFC3BXL
1.8 Ok
1 MSFC3 Daughterboard WS-SUP720
2.6 Ok
2/0 2xGE SPA SPA-2X1GE 2.2
Ok
Mod Online Diag Status
---- -------------------
1 Pass
2 Pass
2/0 Not Applicable
********************************************************************************
All electronic messages sent and received by Stifel Nicolaus
Associates are subject to review by Stifel Nicolaus. Stifel Nicolaus
may retain and reproduce electronic messages for state, federal, or
other regulatory agencies as required by applicable law.
IMPORTANT: Please do not use e-mail to request or authorize the
purchase or sale of any security or commodity, send fund transfer
instructions, or otherwise conduct any securities transactions. Any
requests, orders, instructions, or time-sensitive messages sent by
e-mail cannot be accepted or processed by Stifel Nicolaus. The
accuracy of any information sent by Stifel Nicolaus through e-mail
cannot be warranted or guaranteed by Stifel Nicolaus or its affiliates.
Stifel, Nicolaus & Company, Incorporated
Member NYSE & SIPC
Headquarters: 501 N. Broadway, St. Louis, MO 63102
314-342-2000
********************************************************************************
More information about the cisco-nsp
mailing list