[c-nsp] 7507 GEIP Controller

[Masood Ahmad Shah]

I have strange issue with 7507.  I have added a new GEIP controller into it.
By adding this GEIP controller the CPU usage has been increased up to 20%.
The strange thing is that CPU usage is always normal + 20% and there is no
traffic on this interface ( even if interface is shutdown the usage remains
same ). And if there is traffic it's same J 

 

I can't see the process taking this high CPU utilization if I look into CPU
usage stats.

 

What the heck has happened to this? J

 

Here are CPU stats:

 

Router# #show proc cpu | excl 0.00%__0.00%__0.00%

CPU utilization for five seconds: 15%/13%; one minute: 15%; five minutes:
13%

 PID Runtime(ms)   Invoked      uSecs   5Sec   1Min   5Min TTY Process 

   5      518320     41974      12348  0.00%  0.11%  0.11%   0 Check heaps


  20       66004    924869         71  0.08%  0.01%  0.00%   0 IPC Seat
Manager 

  22      204088   1466063        139  0.00%  0.03%  0.02%   0 ARP Input


  31        7080      1609       4400  0.98%  1.44%  0.59%   2 Virtual Exec


  52      117672      5843      20138  0.00%  0.02%  0.00%   0 Per-minute
Jobs  

  73     3586004  17990635        199  0.82%  0.60%  0.49%   0 IP Input


 189       38964    213398        182  0.00%  0.01%  0.00%   0 IP SNMP


 191       56184    104952        535  0.00%  0.01%  0.00%   0 SNMP ENGINE


 196      160560   1397067        114  0.08%  0.01%  0.00%   0 BGP Router


 197       49200    250208        196  0.00%  0.01%  0.00%   0 BGP I/O

 

IOS version:

 

IOS Version 12.4(3a)

 

Controller

Router# sh ver | inc GEIP

 

1 GEIP controller (1 GigabitEthernet).

1 GEIP controller (1 GigabitEthernet)

 

 

Regards,

Masood Ahmad Shah