[c-nsp] T1 to Ethernet Tunnel

[Joe Maimon]

Robert Blayzor wrote:

> Joe Maimon wrote:
> 
>>Frame-Relay to Ethernet interworking is available in 12.411T IIRC.
> 
> 
> 
> What about HDLC or PPP?  This will not be a frame T1.
> 

http://www.cisco.com/en/US/products/sw/iosswrel/ps1829/products_feature_guide09186a00801b2407.html

If you can use ppp or hdlc, surely you can do frame relay as well.

I actualy prefer frame-relay, allows you to sell multiple services over 
one phy connection, allows you to swap in more vendors, etc...

Other than throwaway cpe that doesnt properly support it, whats not to 
like in frame-relay for serial connections?

frame-relay switching
interface Serial5/0/0:11
   no ip address
  encapsulation frame-relay IETF
  frame-relay lmi-type ansi
  frame-relay intf-type dce
interface Serial5/0/0:11.16 point-to-point
  ip vrf forwarding XXX
  ip address 66.aa.bb.cc 255.255.255.252
  no cdp enable
  frame-relay interface-dlci 16
end