[c-nsp] maximum dCEF routes on GSR engine 2 cards

[Oliver Boehmer (oboehmer)]

John van Oppen <mailto:john at vanoppen.com> wrote on Sunday, July 29, 2007
11:48 AM:

> Yep, that is what I thought.   With that last command it looks like
> MPLS could be the culprit, any advice to that end would be welcome.

Well, do you use MPLS on this node? I only see a few IGP routes, so not
sure what this router's role is in your MPLS network.
Looks like you're not running any ACLs on the interfaces. You might want
to try enabling "no access-list hardware psa" and reload the LCs, not
sure if it helps (haven't dealt with E2 in a while)..

In any case: Even if you can free up some memory now, with the growing
Internet table I fear you'll run out of resources on these LCs sooner or
later.

	oli