[c-nsp] RADIUS accounting configuration

[Masood Ahmad Shah]

Well, what I suggest better you use port mirroring, so by that you can have
same traffic on multiple ports. Some year ago, I did the same :)


Regards,
Masood Ahmad Shah


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Oliver Boehmer
(oboehmer)
Sent: Wednesday, July 18, 2007 11:33 AM
To: Prit Patel
Cc: NSP List
Subject: Re: [c-nsp] RADIUS accounting configuration

Prit,
 
it's a pretty old feature, and should also work on all platforms running
12.2 or later. Can't comment on the other vendors' support for similar
functionality.
 
    oli

________________________________

From: Prit Patel [mailto:shahtejal at gmail.com]
Sent: Wednesday, July 18, 2007 7:25 AM
To: Oliver Boehmer (oboehmer)
Cc: NSP List
Subject: Re: [c-nsp] RADIUS accounting configuration


Thanks Oli.

Can we use this feature on BRAS 10K ?

Pl do let me know if you have any idea about this feature support in
other BRAS like Juniper or Radback or huawai ?




On 7/18/07, Oliver Boehmer (oboehmer) <oboehmer at cisco.com> wrote: 

	Prit Patel <> wrote on Tuesday, July 17, 2007 2:11 PM:
	
	> Hello All,
	>
	> i need to config the Cisco 10K in such a way that it should
send
	> accounting start request to Primary RADIUS server and  Primary
BPM 
	> server simultaneously.
	>
	> In case of failure of either primary server 10K should send
the
	> accounting request to respective server i.e. if primary radius
fails
	> then account record should go sec radius and primary BPM.
Below is 
	> the architecture.
	>
	> ----->>>> Cisco 10K <<<<<<<-----
	>
	> Pri Radius server               Pri BPM Server
	> Sec Radius Server             Sec BPM server. 
	>
	
	the following config should do the trick ("AAA Broadcast
Accouting"
	feature). When one of the servers fail, failover occurs within
the
	server group.
	
	aaa group server radius radserver 
	server 10.0.0.1
	server 10.0.0.2
	aaa group server radius bpmserver
	server 10.0.0.3
	server 10.0.0.4
	
	aaa accounting network default start-stop broadcast group
radserver
	group bpmserver
	
	with appropriate "radius-server host ..." definitions.
	
	        oli
	


_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/