[c-nsp] APC Cabinets with SIde Air Distribution

[Matt Addison]

Looking through the installation guide, the 6000W/8700W are "supported"
but are limited to 4000W in the 6509-NEB-A 

So I guess that'd make the NEB-A looking more like a non -E based
design.

~Matt

-----Original Message-----
From: Gert Doering [mailto:gert at greenie.muc.de] 
Sent: Saturday, June 02, 2007 12:19 PM
To: Matt Addison
Cc: Gert Doering; Simon Hamilton-Wilkes; cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] APC Cabinets with SIde Air Distribution

Hi,

On Sat, Jun 02, 2007 at 12:16:58PM -0400, Matt Addison wrote:
> What's the difference between the E and non E variant? 

More powa, faster backplane (if I'm informed right) on the 6513E.

> From what I can tell the only difference seems to be the up to 6k PSU,

There's a 10k PSU for the "E" :-) - but indeed, 6k would be very much
sufficient for us, using 2x 1300W today.

gert
--
USENET is *not* the non-clickable part of WWW!
 
//www.muc.de/~gert/
Gert Doering - Munich, Germany
gert at greenie.muc.de
fax: +49-89-35655025
gert at net.informatik.tu-muenchen.de