[c-nsp] NPE200 and ipv6 anyone ?

[Ted Mittelstaedt]

I think I did get a early 12.3 IP-Only to boot on a NPE200 just for
grins.  I use 12.1 for production NPE200's.  I would recommend you
try doing a boot from tftp that way you will see if it boots.

Ted 

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net]On Behalf Of Mark Pace Balzan
> Sent: Saturday, June 02, 2007 4:57 AM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] NPE200 and ipv6 anyone ?
> 
> 
> 
> Greetings,
> 
> 
> Just curious if anyone has had any luck with running an ipv6 capable ios
> on the old 7200 npe200.
> 
> Of course since its no longer supported by cisco its not clear which IOS
> will or will not work, and if any versions actually detect the hardware
> and refuse to boot, but its surely worth trying instead of leaving the
> boxes doing the job of a paperweight !
> 
> 12.0S unfortunately does not support IPv6 - im tempted to try 12.3
> mainline, but wanted to see if anyone out there has been lucky.
> 
> 
> thanks
> 
> mark
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>