[c-nsp] SUP-32 and SIP-400

[MKS]

On 6/1/07, Asbjorn Hojmark - Lists <lists at hojmark.org> wrote:
>
> > Is this something that has changed recently or has sup-32
> > always supported the sup-400.
>
> Not "always". Sup32 has supported SIP-400 since SXF.
>
> -A
>
>  Well in any case the product sheet is confusing....

Does somebody care to enlighten me about the switching fabric on the
SIP-400, when do I want to have to connected to the fabric.
I assume that the highest density setup would be 4 times 2-port 1GbE SPA
modules, a total of 8Gbps.
But according to the specs the SIP-400 only does 4Gbps @64-byte packets.
http://www.cisco.com/en/US/products/hw/routers/ps368/products_data_sheet0900aecd8027c9e6.html

Regards
MKS