[c-nsp] Sup720 PFC3 logging counters

[Ian MacKinnon]

I think what you want is optimised acl logging
http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_guide_chapter09186a00801609f6.html#wp1035523

Mark Tohill wrote:
> Hi,
>  
> Is there anyway of getting reliable ACL counters from a Sup720 with PFC3
> (non-B/BXL) ?
>  
> Is it true that 'show access-lists <ACLNAME>' only shows software (MSFC)
> handled traffic while 'show tcam interface vlanXXX acl in ip' shows the
> hardware counters.
>  
> Thanks,
> Mark
>  
>  
> Mark Tohill
> UTV Internet
> T:+44 (0)28 90 262196
> M:+44 (0)7786 278716
> E:mark at u.tv <blocked::mailto:mark at u.tv> 
>  
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/


-- 
Ian MacKinnon
Lumison
t: 0845 1199 900
d: 0131 514 4055
-- 

This email and any files transmitted with it are confidential and intended 
solely for the use of the individual or entity to whom they are addressed.  
If you have received this email in error please notify the sender. Any 
offers or quotation of service are subject to formal specification.  
Errors and omissions excepted.  Please note that any views or opinions 
presented in this email are solely those of the author and do not 
necessarily represent those of Lumison, nplusone or lightershade ltd.  
Finally, the recipient should check this email and any attachments for the 
presence of viruses.  Lumison, nplusone and lightershade ltd accepts no 
liability for any damage caused by any virus transmitted by this email.

-- 
-- 
Virus scanned by Lumison.