[c-nsp] Maximum-routes Routes on 7600 with SUP2/PFC2

[Phil Bedard]

I know on our SUP2s running SXF8 that command doesn't produce
any output, not sure if it worked in previous versions...

Phil


On Jun 5, 2007, at 3:35 AM, Mohacsi Janos wrote:

>
>
>
> On Mon, 4 Jun 2007, Zahid Hassan wrote:
>
>> Dear All,
>>
>>
>>
>> I am carrying full feed Internet (219K) plus VPNv4 routes (1K)
>> on an OSR-7609 with SUP-2/PFC2.
>>
>> I seems to be getting intermittent packets drops and loss of
>> connectivity from CPEs terminating on this OSR.
>>
>> I wondering if has anything to do with the maximum of routes
>> that can be programmed in the hardware allowed per protocol.
>
> The actual usage can be seen with the following command:
> show platform hardware capacity forwarding
>>
>>
>> Does anyone know the maximum number of routes a SUP-2/PFC2 can  
>> carry ?
>
> Have a look at table at the end of this page:
>
>
> http://www.cisco.com/en/US/products/hw/routers/ps368/ 
> prod_eol_notice0900aecd8022200b.html
>
>
>
> Regards,
>   	Janos Mohacsi
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

Phil Bedard
philxor at gmail.com