[c-nsp] 10Gig Ethernet commands

[Church, Charles]

Show int status?  It lists the transceiver on the GE cards.  Not sure
about 10GE though...

Chuck

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Hank Nussbacher
Sent: Tuesday, June 05, 2007 3:40 PM
To: Jared Mauch
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] 10Gig Ethernet commands

On Tue, 5 Jun 2007, Jared Mauch wrote:

> 	'show int cap' perhaps?

Nope.  That one I know.  It's output was 1 line per interface and showed

near the end of the line the type of GBIC identified.  -Hank

>
> 	- jared
>
> On Tue, Jun 05, 2007 at 08:01:04PM +0300, Hank Nussbacher wrote:
>> I lost it and it was posted here a few days ago - what is the command
to
>> see the type of interface used on a 10GigE connection?
>>
>> Thanks,
>> Hank
>>
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
> -- 
> Jared Mauch  | pgp key available via finger from jared at puck.nether.net
> clue++;      | http://puck.nether.net/~jared/  My statements are only
mine.
>
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/