[c-nsp] 10Gig Ethernet commands

Justin M. Streiner streiner at cluebyfour.org
Tue Jun 5 16:42:04 EDT 2007


On Tue, 5 Jun 2007, Church, Charles wrote:

> Show int status?  It lists the transceiver on the GE cards.  Not sure
> about 10GE though...

Yes, it works in 10G interfaces too.

...
Te9/1   gw1.ocl Ten1/1     connected    routed        full    10G 10Gbase-LX4
Te9/2   gw2.omc Ten7/1     connected    routed        full    10G 10Gbase-LX4
Te9/3   cs1.omc Ten1/2     connected    routed        full    10G 10Gbase-LX4
Te9/4   gw1.ord Ten4/1     connected    routed        full    10G 10Gbase-ER

jms


More information about the cisco-nsp mailing list