[c-nsp] WS-C3560G-48TS-S per port ACLs?

[Tom Zingale (tomz)]

Yes on a vlan or port you can allow/deny tcp/ip traffic. See the docs
http://www.cisco.com/en/US/partner/products/hw/switches/ps5528/products_
configuration_guide_chapter09186a008081da63.html




> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of TCIS List Acct
> Sent: Tuesday, June 05, 2007 6:19 PM
> To: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] WS-C3560G-48TS-S per port ACLs?
> 
> 
> 
> Tom Zingale (tomz) wrote:
> > Yes the SMI software feature set supports ACL's on a per port basis
> >
> 
> So I can apply an ACL on a Layer2 port, that allows/denies TCP/IP
traffic?  I
> know I can do this on some Foundry switches, but have never tried on a
35xx
> when
> the port is not a L3 port..
> 
> --Mike
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/