[c-nsp] 6to4 relay setup?

[matthew zeier]

thanks  - dunno why I couldn't find that on my own.

If I anycast 192.88.99.0/24, am I right that the tunnel source must be 
192.88.99.1?  Or is it some other globally routable interface?

David Prall wrote:
> 6to4 Auto Tunnels
> http://www.cisco.com/en/US/products/sw/iosswrel/ps5187/products_configuratio
> n_guide_chapter09186a00801d6604.html#wp1048589
> 
> --
> http://dcp.dcptech.com
>   
> 
>> -----Original Message-----
>> From: cisco-nsp-bounces at puck.nether.net 
>> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of matthew zeier
>> Sent: Tuesday, June 05, 2007 10:37 PM
>> To: cisco-nsp at puck.nether.net
>> Subject: [c-nsp] 6to4 relay setup?
>>
>> Having problems figuring out what I need to configure on a 
>> Cisco router to make it a 6to4 relay.  Any pointers?
>>
>> I plan on anycasting 192.88.99.0/24 from this router.
>>
>> thanks.
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>