[c-nsp] WS-C3560G-48TS-S per port ACLs?

sthaug at nethelp.no sthaug at nethelp.no
Wed Jun 6 01:23:47 EDT 2007


> So I can apply an ACL on a Layer2 port, that allows/denies TCP/IP traffic?  I 
> know I can do this on some Foundry switches, but have never tried on a 35xx when 
> the port is not a L3 port..

I did this several years ago with 3550 switches at my previous
employer. Worked just fine (though it was mildly surprising first
time we tried it, on a whim, and found that it did indeed work).

Steinar Haug, Nethelp consulting, sthaug at nethelp.no


More information about the cisco-nsp mailing list