[c-nsp] Sup 32 PISA not booting up on 6506E

[Kamal Dissanayaka]

Hi,

I am trying to boot sup 32 PISA on 6506E chassy. It was not booting up going
to rommon. It is strange I tried with two PISA cards on both  slots 5 & 6
seperately both having the same issue. Later I tried removiing all cards in
the chassy still the same.

Cahssy is fine and work properly with sup720.

Has anybody got similar issues ?.

I have attached the log.

Thanks for any help.

Best Regards

Kamal
-------------- next part --------------
System Bootstrap, Version 12.2(18r)SX2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2004 by cisco Systems, Inc.
Cat6k-Sup32 platform with 524288 Kbytes of main memory
                                                      

Initializing ATA monitor library...
string is bootdisk:s32p3-adventerprisek9_wan-mz.V122_18_ZY_THROTTLE_070425
                                                                          
Initializing ATA monitor library...
                                   
Self extracting the image... [OK]
Self decompressing the image : ################################################################################################## [OK]

              Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706



Cisco Internetwork Operating System Software 
IOS (tm) s32p3_sp Software (s32p3_sp-ADVENTERPRISEK9_WAN-M), Version 12.2(V122_18_ZY_THROTTLE_070425) INTERIM SOFTWARE
Synced to V122_18_SXF7 on the v122_18_sxf_throttle, Weekly 12.2(18.0.31)ZY
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Wed 25-Apr-07 04:51 by kchristi
Image text-base: 0x4023105C, data-base: 0x41560000

MAC based EOBC installed

00:00:05: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.

00:00:05: %PFREDUN-6-ACTIVE: Initializing as ACTIVE processor

00:00:07: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.

00:00:06: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.

00:00:07: %OIR-SP-6-CONSOLE: Changing console ownership to route processor



00:03:08: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.

00:03:08: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.

00:03:08: %OIR-SP-6-CONSOLE: Changing console ownership to switch processor



*** System received a Software forced crash ***
signal= 0x17, code= 0x24, context= 0x4234d444  
  PC = 0x4040083c, SP = 0x41594560, RA = 0x403fb618
  Cause Reg = 0x00001020, Status Reg = 0x34008002