[c-nsp] Sup 32 PISA not booting up on 6506E

[Sukumar Subburayan]

Kamal,

Also, it looks like your RP rommon is not set correctly and SP/RP DUALCON 
(ie dualconsole mode..) is set. You probably got this as a demo unit from 
someone in Cisco, and they probably din't clean all this up.

>From the SP-rommon do this:

priv
unset DUALCON
sync

Then try booting again. It will drop to RP-rommon. Then do:

priv
confreg 0x2102
sync

Then try booting the image again. It should boot. If it doesn't please get 
us the console log.

Also, can you please let us know through who you got the Sup32-PISA board 
and what is main feature (NBAR/FPM etc..) you are planning to use? You can 
unicast me the feature details.

thanks
sukumar

  On Thu, 7 Jun 2007, Sukumar Subburayan 
wrote:

> Also, are we sure that  you are booting a Sup32-PISA here, and not just a
> Sup32/MSFC2C?
>
> Kamal, can you contact me offline?
>
> sukumar
>
> On Thu, 7 Jun 2007, Rodney Dunn wrote:
>
>> Kamal,
>>
>> string is bootdisk:s32p3-adventerprisek9_wan-mz.V122_18_ZY_THROTTLE_070425
>>
>> That looks like some datecode image on a throttle. I can't find it
>> so I couldn't try to decode the crash.
>>
>> Can you try the 12.2(18)ZY that is on CCO or is your image one given
>> to you after that?
>>
>> Rodney
>>
>>
>>
>>
>> On Thu, Jun 07, 2007 at 04:31:11PM +1000, Kamal Dissanayaka wrote:
>>> Hi,
>>>
>>> I am trying to boot sup 32 PISA on 6506E chassy. It was not booting up going
>>> to rommon. It is strange I tried with two PISA cards on both  slots 5 & 6
>>> seperately both having the same issue. Later I tried removiing all cards in
>>> the chassy still the same.
>>>
>>> Cahssy is fine and work properly with sup720.
>>>
>>> Has anybody got similar issues ?.
>>>
>>> I have attached the log.
>>>
>>> Thanks for any help.
>>>
>>> Best Regards
>>>
>>> Kamal
>>
>>> System Bootstrap, Version 12.2(18r)SX2, RELEASE SOFTWARE (fc1)
>>> Technical Support: http://www.cisco.com/techsupport
>>> Copyright (c) 2004 by cisco Systems, Inc.
>>> Cat6k-Sup32 platform with 524288 Kbytes of main memory
>>>
>>>
>>> Initializing ATA monitor library...
>>> string is bootdisk:s32p3-adventerprisek9_wan-mz.V122_18_ZY_THROTTLE_070425
>>>
>>> Initializing ATA monitor library...
>>>
>>> Self extracting the image... [OK]
>>> Self decompressing the image : ################################################################################################## [OK]
>>>
>>>               Restricted Rights Legend
>>>
>>> Use, duplication, or disclosure by the Government is
>>> subject to restrictions as set forth in subparagraph
>>> (c) of the Commercial Computer Software - Restricted
>>> Rights clause at FAR sec. 52.227-19 and subparagraph
>>> (c) (1) (ii) of the Rights in Technical Data and Computer
>>> Software clause at DFARS sec. 252.227-7013.
>>>
>>>            cisco Systems, Inc.
>>>            170 West Tasman Drive
>>>            San Jose, California 95134-1706
>>>
>>>
>>>
>>> Cisco Internetwork Operating System Software
>>> IOS (tm) s32p3_sp Software (s32p3_sp-ADVENTERPRISEK9_WAN-M), Version 12.2(V122_18_ZY_THROTTLE_070425) INTERIM SOFTWARE
>>> Synced to V122_18_SXF7 on the v122_18_sxf_throttle, Weekly 12.2(18.0.31)ZY
>>> Technical Support: http://www.cisco.com/techsupport
>>> Copyright (c) 1986-2007 by cisco Systems, Inc.
>>> Compiled Wed 25-Apr-07 04:51 by kchristi
>>> Image text-base: 0x4023105C, data-base: 0x41560000
>>>
>>> MAC based EOBC installed
>>>
>>> 00:00:05: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
>>>
>>> 00:00:05: %PFREDUN-6-ACTIVE: Initializing as ACTIVE processor
>>>
>>> 00:00:07: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
>>>
>>> 00:00:06: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
>>>
>>> 00:00:07: %OIR-SP-6-CONSOLE: Changing console ownership to route processor
>>>
>>>
>>>
>>> 00:03:08: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
>>>
>>> 00:03:08: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
>>>
>>> 00:03:08: %OIR-SP-6-CONSOLE: Changing console ownership to switch processor
>>>
>>>
>>>
>>> *** System received a Software forced crash ***
>>> signal= 0x17, code= 0x24, context= 0x4234d444
>>>   PC = 0x4040083c, SP = 0x41594560, RA = 0x403fb618
>>>   Cause Reg = 0x00001020, Status Reg = 0x34008002
>>
>>> _______________________________________________
>>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>