[c-nsp] 6506 SUP2/MSFC2 Native IOS upgrade issue

Bryan bryan at tec-works.com
Thu Jun 7 21:43:04 EDT 2007


- Greetings all, trying to upgrade the IOS on a SUP2/MSFC2 which is 
already in native move at 12.1(27b)E and trying to upgrade to 12.2.18 
but I keep seeing similar errors to this:

- I uploaded the image to disk0: and set the following:

boot system flash disk0:s222-adventerprisek9_wan-mz.122-18.SXF9.bin

- Upon reboot it won't boot from the disk, it shows:

System Bootstrap, Version 7.1(1)
Copyright (c) 1994-2001 by cisco Systems, Inc.
c6k_sup2 processor with 131072 Kbytes of main memory

Autoboot: failed, BOOT string is empty
rommon 1 > boot disk0:
string is disk0:s222-adventerprisek9_wan-mz.122-18.SXF9.bin

- so I get into rommon and i force it to boot from disk0: and it appears 
to load up just fine but then it just crashes and I see:


%Software-forced reload


Breakpoint exception, CPU signal 23, PC = 0x41CC9D0C


-Traceback= 41CC9D0C 41CC7C58 41A97440 41A9746C 4197D57C 419B9E64 
419B0214 419B026C 407482CC 40748FB4 418D975C 418D9578 41A38A00 41A35920 
41A35B3C 41CBC26C
$0 : 00000000, AT : 1E020000, v0 : 43D10000, v1 : 00000090
a0 : 505714C8, a1 : 5000BAF4, a2 : 00000005, a3 : FFFFFFFC
t0 : 00000008, t1 : 00000001, t2 : 00000063, t3 : 00000003
t4 : 5000BAA0, t5 : 00000000, t6 : 00001F6F, t7 : 5000BA98
s0 : 00000000, s1 : 42F00000, s2 : 447E814C, s3 : 087C9248
s4 : 45275A30, s5 : 451F4C18, s6 : 00000040, s7 : 436F0000
t8 : 5000BA74, t9 : 00000007, k0 : 00000000, k1 : 00000000
gp : 42F516E0, sp : 5000BB28, s8 : 00000000, ra : 41CC7C58
EPC  : 41CC9D0C, ErrorEPC : 4036B058, SREG     : 3401F103
MDLO : 99999A3B, MDHI     : 00000285, BadVaddr : 578495DA
CacheErr : F4800000, DErrAddr0 : 1E02000C, DErrAddr1 : 805714C8
DATA_START : 0x42C4B040
Cause 00000824 (Code 0x9): Breakpoint exception

Writing crashinfo to bootflash:crashinfo_20070608-021407

=== Flushing messages (02:14:07 UTC Fri Jun 8 2007) ===

Buffered messages:
Queued messages:
00:00:56: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console 
debugging output.

00:00:54: RP: Currently running ROMMON from S (Gold) region
00:00:56: %CPU_MONITOR-3-PEER_EXCEPTION: CPU_MONITOR peer has failed due 
to exception , reset by [1/1]
*** System received a Software forced crash ***
signal= 0x17, code= 0x436a0000, context= 0x43d15fa4
PC = 0x41cbc874, Cause = 0x3820, Status Reg = 0x34018002
rommon 1 >
00:00:57: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console 
debugging output.

00:00:57: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to 
ensure console debugging output.

00:00:57: %OIR-SP-6-CONSOLE: Changing console ownership to switch processor



*** System received a Software forced crash ***
signal= 0x17, code= 0x41e00000, context= 0x41e2c044
PC = 0x402d11ec, Cause = 0x1820, Status Reg = 0x34018002


Any thoughts/ideas/suggestions?


TIA,

Bryan

-- 
_________________________________________________
_________________________________________________
Bryan Welch                  Direct:(425)947-7002
Tec-Works Inc                Fax:   (425)821-0596
  Total Network Solutions     bryan at tec-works.com
             www.tec-works.com
_________________________________________________


More information about the cisco-nsp mailing list