[c-nsp] 6506 SUP2/MSFC2 Native IOS upgrade issue

[David Prall]

To start with you have to upgrade to 256MB of RAM on both the SP and RP to
support 12.2(18)SXF on the Sup2.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/122sx/ol_4164.ht
m#wp2561255

David

--
http://dcp.dcptech.com
  

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Bryan
> Sent: Thursday, June 07, 2007 9:43 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] 6506 SUP2/MSFC2 Native IOS upgrade issue
> 
> - Greetings all, trying to upgrade the IOS on a SUP2/MSFC2 
> which is already in native move at 12.1(27b)E and trying to 
> upgrade to 12.2.18 but I keep seeing similar errors to this:
> 
> - I uploaded the image to disk0: and set the following:
> 
> boot system flash disk0:s222-adventerprisek9_wan-mz.122-18.SXF9.bin
> 
> - Upon reboot it won't boot from the disk, it shows:
> 
> System Bootstrap, Version 7.1(1)
> Copyright (c) 1994-2001 by cisco Systems, Inc.
> c6k_sup2 processor with 131072 Kbytes of main memory
> 
> Autoboot: failed, BOOT string is empty
> rommon 1 > boot disk0:
> string is disk0:s222-adventerprisek9_wan-mz.122-18.SXF9.bin
> 
> - so I get into rommon and i force it to boot from disk0: and 
> it appears to load up just fine but then it just crashes and I see:
> 
> 
> %Software-forced reload
> 
> 
> Breakpoint exception, CPU signal 23, PC = 0x41CC9D0C
> 
> 
> -Traceback= 41CC9D0C 41CC7C58 41A97440 41A9746C 4197D57C 419B9E64 
> 419B0214 419B026C 407482CC 40748FB4 418D975C 418D9578 
> 41A38A00 41A35920 
> 41A35B3C 41CBC26C
> $0 : 00000000, AT : 1E020000, v0 : 43D10000, v1 : 00000090
> a0 : 505714C8, a1 : 5000BAF4, a2 : 00000005, a3 : FFFFFFFC
> t0 : 00000008, t1 : 00000001, t2 : 00000063, t3 : 00000003
> t4 : 5000BAA0, t5 : 00000000, t6 : 00001F6F, t7 : 5000BA98
> s0 : 00000000, s1 : 42F00000, s2 : 447E814C, s3 : 087C9248
> s4 : 45275A30, s5 : 451F4C18, s6 : 00000040, s7 : 436F0000
> t8 : 5000BA74, t9 : 00000007, k0 : 00000000, k1 : 00000000
> gp : 42F516E0, sp : 5000BB28, s8 : 00000000, ra : 41CC7C58
> EPC  : 41CC9D0C, ErrorEPC : 4036B058, SREG     : 3401F103
> MDLO : 99999A3B, MDHI     : 00000285, BadVaddr : 578495DA
> CacheErr : F4800000, DErrAddr0 : 1E02000C, DErrAddr1 : 805714C8
> DATA_START : 0x42C4B040
> Cause 00000824 (Code 0x9): Breakpoint exception
> 
> Writing crashinfo to bootflash:crashinfo_20070608-021407
> 
> === Flushing messages (02:14:07 UTC Fri Jun 8 2007) ===
> 
> Buffered messages:
> Queued messages:
> 00:00:56: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console 
> debugging output.
> 
> 00:00:54: RP: Currently running ROMMON from S (Gold) region
> 00:00:56: %CPU_MONITOR-3-PEER_EXCEPTION: CPU_MONITOR peer has 
> failed due 
> to exception , reset by [1/1]
> *** System received a Software forced crash ***
> signal= 0x17, code= 0x436a0000, context= 0x43d15fa4
> PC = 0x41cbc874, Cause = 0x3820, Status Reg = 0x34018002
> rommon 1 >
> 00:00:57: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console 
> debugging output.
> 
> 00:00:57: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to 
> ensure console debugging output.
> 
> 00:00:57: %OIR-SP-6-CONSOLE: Changing console ownership to 
> switch processor
> 
> 
> 
> *** System received a Software forced crash ***
> signal= 0x17, code= 0x41e00000, context= 0x41e2c044
> PC = 0x402d11ec, Cause = 0x1820, Status Reg = 0x34018002
> 
> 
> Any thoughts/ideas/suggestions?
> 
> 
> TIA,
> 
> Bryan
> 
> -- 
> _________________________________________________
> _________________________________________________
> Bryan Welch                  Direct:(425)947-7002
> Tec-Works Inc                Fax:   (425)821-0596
>   Total Network Solutions     bryan at tec-works.com
>              www.tec-works.com
> _________________________________________________
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/