[c-nsp] cisco 851

[Aman Chugh]

Thanks peter for replying , I did do some research on this prior to sending
it out on the list. What I was looking for was a sample config to see if I
need to configure the PPOE client on the router and creating a dialer
interface or not as I would be using a external dsl modem as well,I am not
sure where the PPOE username and password configuration would be done it I
have an external dsl modem and static IP on the Modem' wan interface.

Aman


On 6/22/07, Peter Walker <peter at grole.org> wrote:
>
>
> --On 21 June 2007 20:49 +0530 Aman Chugh <aman.chugh at gmail.com> wrote:
>
> > All,
> >
> > I need to connect a Cisco 851 at remote location to the central
> > office 2801 router connected to the internet
>
> Aman
>
> I am a little surprised that you sent a question to this list before
> looking at Cisco's support site.
>
> If you looked at
>
>        www.cisco.com
>
>        -> support
>         -> documentation
>          -> Networking technology documentation : Security and VPN
>           -> IPSec
>            -> Configuration examples and technotes
>
> you would have found over 150 examples of how to configure VPNs
> involving cisco kit.  The section "IPSec on Router to Router" has a
> bunch of examples that might help.
>
> > Is there any good
> > document for creating site to site vpn between two locations,
>
> Yes
>
> > also
> > what all features are available with 851 along with ios firewall
> > and vpn, I do have a static ip from remote site ISP.
>
>        www.cisco.com
>
>        -> products
>
> ... I think you get the idea
>
> Also
>
>        www.cisco.com/go/fn
>
>
> >
> >
>
> > Aman
>
> Peter
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>