[c-nsp] FE switchport output drops

[Church, Charles]

Ras,

	That would work for a normal CPU-based router, but on a L3
switch, you're stuck with whatever interface buffer it came with.
Regardless, you shouldn't be seeing drops with such small traffic
levels.  Can you look at a show controllers to see what's going on?  Are
all frames being switched in hardware? 

Chuck 

-----Original Message-----
From: Ras [mailto:jeekay at gmail.com] 
Sent: Monday, June 25, 2007 5:42 PM
To: Church, Charles
Cc: c-nsp
Subject: Re: [c-nsp] FE switchport output drops

On 25/06/07, Ras <jeekay at gmail.com> wrote:
> The entire config is:

Several people have suggests 'hold-queue 100 out' to enlarge the queue a
little. However for some bizarre reason this command doesn't seem to be
present on a 4506 running 12.2(31)SGA, even though the documentation
suggests it has been around since at lease 11.0.

Anyone know why that might be? :)

Thanks,
Ras