[c-nsp] 802.1X on WS-C3524-XL-EN

[Plank, Jason]

He's asking about 802.1x for authentication. Not layer 2 trunking protocols.



Jason Plank, CCIE# 16560 
Senior Network Engineer 
Conde Nast Publications 
1201 North Market St. 
Wilmington, DE 19808 
Email: Jason_Plank at CondeNast.com 
Office: 302-830-4910 
Cell: 302-290-0387 



 -----Original Message-----
From: 	Eric Kagan [mailto:ekagan at axsne.com]
Sent:	Thursday, June 28, 2007 07:24 AM Eastern Standard Time
To:	Affan Basalamah; cisco-nsp at puck.nether.net
Subject:	Re: [c-nsp] 802.1X on WS-C3524-XL-EN

> 
> Hi all,
> 
> I want to know is there any way to have my old WS-C3524-XL-EN 
> to allow 802.1X ?
> If there are no way to enable this switch to allow dot1x, maybe I have
> to look for another switch.
> 

It supports both ISL and dot1q:

interface GigabitEthernet0/1
 description Trunk to XXX
 switchport trunk encapsulation dot1q
 switchport mode trunk
!

Config t
(confi)#int g0/1
(confi)#switchport trunk encapsulation ?
  dot1q  Interface uses only 802.1q trunking encapsulation when trunking
  isl    Interface uses only ISL trunking encapsulation when trunking



_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/