[c-nsp] 802.1X on WS-C3524-XL-EN

[Affan Basalamah]

Hi Eric,

Thanks, but what I mean is 802.1X, the authentication protocol, is not
the 802.1Q as the VLAN trunking protocol.

-affan

On 6/28/07, Eric Kagan <ekagan at axsne.com> wrote:
> >
> > Hi all,
> >
> > I want to know is there any way to have my old WS-C3524-XL-EN
> > to allow 802.1X ?
> > If there are no way to enable this switch to allow dot1x, maybe I have
> > to look for another switch.
> >
>
> It supports both ISL and dot1q:
>
> interface GigabitEthernet0/1
>  description Trunk to XXX
>  switchport trunk encapsulation dot1q
>  switchport mode trunk
> !
>
> Config t
> (confi)#int g0/1
> (confi)#switchport trunk encapsulation ?
>   dot1q  Interface uses only 802.1q trunking encapsulation when trunking
>   isl    Interface uses only ISL trunking encapsulation when trunking
>
>
>
>