[c-nsp] Output drops on WS-X6348-RJ-45
Robert Hass
robhass at gmail.com
Sat Jun 30 11:40:07 EDT 2007
On 6/30/07, Peter Salanki <peter.salanki at bahnhof.net> wrote:
> Try show queueing interface fa 1/1, probably you are running out of
> buffer space with bursty traffic.
Hi
I attached below output of 'show queueing interface ...' commands (for
Fa1/1 and Fa1/3 - which had output drops). Can I do something with
this issue - some QoS configuration or other thing ?
#sh queueing interface fa1/1
Interface FastEthernet1/1 queueing strategy: Weighted Round-Robin
Port QoS is enabled
Port is untrusted
Extend trust state: not trusted [COS = 0]
Default COS is 0
Queueing Mode In Tx direction: mode-cos
Transmit queues [type = 2q2t]:
Queue Id Scheduling Num of thresholds
-----------------------------------------
1 WRR low 2
2 WRR high 2
WRR bandwidth ratios: 100[queue 1] 255[queue 2]
queue-limit ratios: 70[queue 1] 30[queue 2]
queue tail-drop-thresholds
--------------------------
1 80[1] 100[2]
2 80[1] 100[2]
queue thresh cos-map
---------------------------------------
1 1 0 1
1 2 2 3
2 1 4 5
2 2 6 7
Queueing Mode In Rx direction: mode-cos
Receive queues [type = 1q4t]:
Queue Id Scheduling Num of thresholds
-----------------------------------------
1 Standard 4
queue tail-drop-thresholds
--------------------------
1 100[1] 100[2] 100[3] 100[4]
queue thresh cos-map
---------------------------------------
1 1
1 2
1 3 0 1 2 3 4 5 6 7
1 4
Packets dropped on Transmit:
BPDU packets: 0
queue thresh dropped [cos-map]
---------------------------------------------------
1 1 4884 [0 1 ]
1 2 0 [2 3 ]
2 1 0 [4 5 ]
2 2 0 [6 7 ]
Packets dropped on Receive:
BPDU packets: 0
queue thresh dropped [cos-map]
---------------------------------------------------
1 3 0 [0 1 2 3 4 5 6 7 ]
#sh queueing interface fa1/3
Interface FastEthernet1/3 queueing strategy: Weighted Round-Robin
Port QoS is enabled
Port is untrusted
Extend trust state: not trusted [COS = 0]
Default COS is 0
Queueing Mode In Tx direction: mode-cos
Transmit queues [type = 2q2t]:
Queue Id Scheduling Num of thresholds
-----------------------------------------
1 WRR low 2
2 WRR high 2
WRR bandwidth ratios: 100[queue 1] 255[queue 2]
queue-limit ratios: 70[queue 1] 30[queue 2]
queue tail-drop-thresholds
--------------------------
1 80[1] 100[2]
2 80[1] 100[2]
queue thresh cos-map
---------------------------------------
1 1 0 1
1 2 2 3
2 1 4 5
2 2 6 7
Queueing Mode In Rx direction: mode-cos
Receive queues [type = 1q4t]:
Queue Id Scheduling Num of thresholds
-----------------------------------------
1 Standard 4
queue tail-drop-thresholds
--------------------------
1 100[1] 100[2] 100[3] 100[4]
queue thresh cos-map
---------------------------------------
1 1
1 2
1 3 0 1 2 3 4 5 6 7
1 4
Packets dropped on Transmit:
BPDU packets: 0
queue thresh dropped [cos-map]
---------------------------------------------------
1 1 12172 [0 1 ]
1 2 0 [2 3 ]
2 1 0 [4 5 ]
2 2 0 [6 7 ]
Packets dropped on Receive:
BPDU packets: 0
queue thresh dropped [cos-map]
---------------------------------------------------
1 3 0 [0 1 2 3 4 5 6 7 ]
More information about the cisco-nsp
mailing list