[c-nsp] SUP720-3B and NAT performance

[Asbjorn Hojmark - Lists]

> Is there any way to determine whether a hardware NF entry has
> been installed or not?

'sh mls netf ip sw' will show you software-installed NetFlow
entries.

> Funny also that the CPU load on the router should grow with 
> traffic inside that one session (aka flow)...

That suggests to me that flows are not being set up correctly
for that one session.

But wait...

Were you trying to NAT ESP? The Sup720 will only NAT UDP and
TCP in 'hardware'. 

-A