[c-nsp] memory-size iomem (7200 series)

[Tristan Gulyas]

Hi,

I know I'm dragging up a message from over two years ago, but I have seen no 
hard evidence of memory-size iomem working on the Cisco 7200...

What are the requirements for this?

.t
----- Original Message ----- 
From: "Brian Feeny" <signal at shreve.net>
To: "'cisco-nsp'" <cisco-nsp at puck.nether.net>
Sent: Thursday, January 06, 2005 12:57 PM
Subject: [c-nsp] memory-size iomem (7200 series)


>
> Thank god cisco added the ability to use memory-size iomem on 7200's.
>
> With the default (64MB I believe), our NPE-300's choke at 3 full BGP 
> tables, CEF, uRPF and communities (no soft reconfig).
> After I do a "memory-size iomem 32", I have about 40MB left in the end, 
> and IO has about 30MB free.  At least that buys me a few months on NPE 
> upgrades.
>
> If your finding yourself trimming back some features because of memory on 
> the NPE300/400, take a look at the "memory-size iomem", it can at least 
> buy you another 32MB if  your not in that much need of IO-Mem.
>
> Brian
>
> ---------------------------------------------
> Brian Feeny, CCIE #8036, CISSP
> Network Engineer
> ShreveNet Inc.
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>