[c-nsp] memory-size iomem (7200 series)

[Siva Valliappan]

do you have a NPE-300 or NPE-400 or NPE-G1?
for the NPE-300 the change to make it configurable came in via CSCdv58969
for the NPE-400 the change to make it configurable was CSCdy46150
for the NPE-G1 the change was CSCdx67078

cheers
.siva

On Wed, 7 Mar 2007, Tristan Gulyas wrote:

> Hi,
>
> I know I'm dragging up a message from over two years ago, but I have seen no
> hard evidence of memory-size iomem working on the Cisco 7200...
>
> What are the requirements for this?
>
> .t
> ----- Original Message -----
> From: "Brian Feeny" <signal at shreve.net>
> To: "'cisco-nsp'" <cisco-nsp at puck.nether.net>
> Sent: Thursday, January 06, 2005 12:57 PM
> Subject: [c-nsp] memory-size iomem (7200 series)
>
>
>>
>> Thank god cisco added the ability to use memory-size iomem on 7200's.
>>
>> With the default (64MB I believe), our NPE-300's choke at 3 full BGP
>> tables, CEF, uRPF and communities (no soft reconfig).
>> After I do a "memory-size iomem 32", I have about 40MB left in the end,
>> and IO has about 30MB free.  At least that buys me a few months on NPE
>> upgrades.
>>
>> If your finding yourself trimming back some features because of memory on
>> the NPE300/400, take a look at the "memory-size iomem", it can at least
>> buy you another 32MB if  your not in that much need of IO-Mem.
>>
>> Brian
>>
>> ---------------------------------------------
>> Brian Feeny, CCIE #8036, CISSP
>> Network Engineer
>> ShreveNet Inc.
>>
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>