[c-nsp] c-delay/pos trig delay/dwdm link with bgp

[hjan]

>Oliver Boehmer (oboehmer) wrote:
> 
> right, you want to tune this timer.. The default of 100 msec should,
> however, take care of the short los while protection kicked in? Can you
> configure all "pos report" commands on the interface to see what
> happens?
> 

Thanks Oli !
This morning customer sent me their pos configuration:

interface POS6/1
 description Link POS
 ip address 192.168.0.1 255.255.255.252
 load-interval 30
 mls qos trust dscp
!

So it thinks the default value would work, but command must be
configured by customer! :)

Regards,
Gianluca