[c-nsp] Cisco 2621 and Asterisk

[tusker keg]

Howdy Azher,,

This thread might be of help


http://forums.whirlpool.net.au/forum-replies-archive.cfm/628683.html


regards

./tusker

On 3/13/07, Azher Amin <azher at niit.edu.pk> wrote:
> Hi,
>
> Further in Cisco 12.2, there is no command like: authentication username
> 555 password 12345
>
> Now how can i authenticate the call originating from Cisco to Asterisk ?
>
> Plz suggest.
>
> -Azher
>
>
>
> Jared Mauch wrote:
>
> >On Tue, Mar 13, 2007 at 06:50:50AM +0500, Azher Amin wrote:
> >
> >
> >>Hi,
> >>
> >>I am trying to configure Cisco 2621 (2 FXS + 2FXO) with Asterisk PBX.
> >>Cisco IOS is 12.2. I have done many configurations but somehow they are
> >>not working. Asterisk requires authentication while in this IOS release
> >>under sip-ua  , username authentication option is not available. Can
> >>someone plz share his experience on how to configure the whole setup.
> >>
> >>
> >
> >       so what i've done in the past is this:
> >
> >
> >asterisk sip.conf
> >[pstnlink]
> >type=friend
> >host=1.2.3.4
> >nat=no
> >qualify=no
> >context=your-correct-context
> >insecure=yes
> >insecure=very
> >
> >[pstnlink1]
> >type=friend
> >host=1.2.3.4
> >nat=no
> >qualify=no
> >context=your-correct-context
> >insecure=yes
> >insecure=very
> >
> >[pstnlink2]
> >type=friend
> >host=1.2.3.4
> >nat=no
> >qualify=no
> >context=your-correct-context
> >insecure=yes
> >insecure=very
> >
> >       where the various ips correspond to the ip interfaces
> >it might source a sip request from, or where you might send it
> >to.  eg: loopback vs fe/eth/serial
> >
> >       you can turn qualify on, i just have it off for some
> >legacy reason.
> >
> >       - jared
> >
> >
> >
> >
>
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>