[c-nsp] PIX NAT Issue

[Shakeel Ahmad]

Guys, I am stuck with a PIX issue

Client have two internet connections terminated on PIX 7.x ; Default route
is exiting via interface "outside" , and some specific needs to go out from
"outside2" - Client has prepared three NAT IDs as requirement is to PAT each
department with a unique IP address and rate-limit them on a boundry router
(which is working)

Issue:

Now client is short of IPs on "outside2" interface , and wants to PAT every
thing on interface ip. But PIX dont allow to map more than one NAT ID on
interface, is there any command or possibility for doing that:

example syntax:

nat (inside) 1 access-list inside-permit
nat (dmz) 2 access-list dmz-permit

nat (outside) 1 80.x.x.1
nat (outside) 2 80.x.x.2
--------------------------------------
nat (outside2) 1 interface ??
  nat (outside2) 2 interface ??



thanks,
SA