[c-nsp] Voice Configuration

[Paul Stewart]

Thanks for the input... my experience with Adtran in general hasn't been
very good - Cisco rarely lets us down..;) 

-----Original Message-----
From: Mark Kent [mailto:mark at noc.mainstreet.net] 
Sent: Wednesday, March 14, 2007 1:13 PM
To: cisco-nsp at puck.nether.net
Cc: paul at paulstewart.org
Subject: Re: Voice Configuration

>> Customer Prem: Cisco 2821 --> PRI
>> Customer Prem: Cisco 2821 --> 8 FXO lines (for fax primarily)

Earlier, someone on this list pointed me at the Adtran TA900 line, for this
kind of thing.  I've used the TA908e with good results.
It's about $1700 for the box, which has two T1 for data and two
PRI/T1 for pbx/telco.   I haven't actually used the two T1, but
it's supposed to be able to do MLPPP.

I think this is a fair bit less expensive than the cisco you mapped out.

-mark