[c-nsp] aggregate link between cisco6509 and JuniperT640

[andre.pronk at kpn.com]

The next problem that i have is that when i configure port-channel on a cisco6509
with two TenGig interfaces.I have to configure the channel group mode active when i 
make this connection to a juniper T640.And LAPC on on the juniper
 
The problem that occur is that the aggregate link on the juniper exist 
with some unit's (vlans) and is not a routed link.
 
can someone tell me what he configuration coould be when you
want to create a aggregate link between a ciso and a juniper
on a trunk line
 
greetings andre